Site Navigation

Your Account

Choose Language

  1. It is important you have a hygrometer placed near to the machine for an accurate reading. Room humidity should be anywhere from 40 - 60 %
    • It is important you have a hygrometer placed near to the machine for an accurate reading.

    • Room humidity should be anywhere from 40 - 60 %

    • Room temperature should be between 66 and 78 degrees Fahrenheit. 70 degrees is perfect.

    • Your environment must remain stable at all times to ensure the longevity of the printer.

  2. Printer must be plugged into a surge protector or UPS, but should not be plugged along with devices that fluctuate in power like an air conditioner, heater or humidifier The 110v heat press should be plugged into a dedicated 20 amp circuit.
    • Printer must be plugged into a surge protector or UPS, but should not be plugged along with devices that fluctuate in power like an air conditioner, heater or humidifier

    • The 110v heat press should be plugged into a dedicated 20 amp circuit.

  3. Please have a USB 2.0 A Male to B Male Cable ready for use If you choose to set up a network connection, please contact Epson support after the training for setup.
    • Please have a USB 2.0 A Male to B Male Cable ready for use

    • If you choose to set up a network connection, please contact Epson support after the training for setup.

  4. Please have a Skype account for Skype video support if needed. It is suggested you install the app on your mobile device
    • Please have a Skype account for Skype video support if needed. It is suggested you install the app on your mobile device

    • Please contact our support team if you have any difficulty installing the software.

  5. Please for a minimum of three black and white t-shirts for training purposes.
    • Please for a minimum of three black and white t-shirts for training purposes.

    • Listed below is a list of preferred t-shirts to use,

    • Cotton Heritage -1082, American Apparel- 2001, Next Level- 3600, Alstyle- 701R / 5301, Hanes Nano, Anvil- 780, Bella-Canvas -3001, Spectra Tee -3100,

  6. When setting up the room layout make sure the printer is a minimum of 5 feet away from other equipment. (heat press, heater, humidifier, air conditioner, windows).
    • When setting up the room layout make sure the printer is a minimum of 5 feet away from other equipment. (heat press, heater, humidifier, air conditioner, windows).

    • Note: You may setup the Speed Treater TX right beside Epson F2000 Printer.

Finish Line

One other person completed this guide.

Equipment Zone

Member since: 06/05/2012

801 Reputation

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 122