Skip to main content

Site Navigation

Your Account

Choose Language

  1. Insert the Veloci-T Software CD into your CD/DVD drive. If the option is available, click the option to Run Setup.exe. Then proceed to Step 3. (If this option is not available, continue with Step 1.) If Autoplay  is enabled on your computer, you will see the window in the first image. Click the Open Folder To View Files option. Skip to the next Step.
    • Insert the Veloci-T Software CD into your CD/DVD drive.

    • If the option is available, click the option to Run Setup.exe. Then proceed to Step 3. (If this option is not available, continue with Step 1.)

    • If Autoplay is enabled on your computer, you will see the window in the first image. Click the Open Folder To View Files option. Skip to the next Step.

    • If Autoplay is disabled and you do not receive notification that a disc has been inserted, right-click on the Start Button and then left-click on Open Windows Explorer, seen in the second image.

    • In the Windows Explorer window, click on your CD/DVD-ROM drive in the list on the left pane, likely labeled D:, though this depends on how many drives are installed in your computer.

  2. The contents of the disc should now be visible in Windows Explorer. Double-click the Install folder. Scroll to the bottom of the contents of the Install folder and find setup.exe, as seen in the third image. This file will be labeled as an Application under the Type column. The Setup Wizard has been successfully initiated once you see the pop-up asking you to choose an installation language, as seen in the third image.
    • The contents of the disc should now be visible in Windows Explorer. Double-click the Install folder.

    • Scroll to the bottom of the contents of the Install folder and find setup.exe, as seen in the third image. This file will be labeled as an Application under the Type column.

    • The Setup Wizard has been successfully initiated once you see the pop-up asking you to choose an installation language, as seen in the third image.

  3. Choose OK on the language selection pop-up and see the installation begin, as in the first image. You will then be asked to make sure that the orange dongle provided with your software is plugged into a USB port. When you plug in the Dongle, you may see a screen that asks you what action to take with regards to a Cadlink device, as in the third image. You may click the X in the upper-right corner to cancel this prompt.
    • Choose OK on the language selection pop-up and see the installation begin, as in the first image.

    • You will then be asked to make sure that the orange dongle provided with your software is plugged into a USB port.

    • When you plug in the Dongle, you may see a screen that asks you what action to take with regards to a Cadlink device, as in the third image. You may click the X in the upper-right corner to cancel this prompt.

    • Hit Next on the screen reminding about the dongle to continue with the installation.

  4. On the Welcome to the InstallShield Wizard screen, click Next. Select to I accept the terms... option on the next screen and click Next. Make sure the Complete VPM Apparel mini Installation option is selected and click Next.
    • On the Welcome to the InstallShield Wizard screen, click Next.

    • Select to I accept the terms... option on the next screen and click Next.

    • Make sure the Complete VPM Apparel mini Installation option is selected and click Next.

  5. The next screen determines where the Wizard will install the VPM software. Click Change to set your own location, though we recommend you leave the default location, C:\VPM Apparel. Click Next to confirmation the location. The following screen determines the name of the Start Menu shortcut that will allow you to run the software. We recommend that you leave it set to the default. Click Next. The installation will now occur, as seen in the third image.
    • The next screen determines where the Wizard will install the VPM software. Click Change to set your own location, though we recommend you leave the default location, C:\VPM Apparel. Click Next to confirmation the location.

    • The following screen determines the name of the Start Menu shortcut that will allow you to run the software. We recommend that you leave it set to the default. Click Next.

    • The installation will now occur, as seen in the third image.

  6. Click Finish to confirm installation of the VPM Apparel rip.
    • Click Finish to confirm installation of the VPM Apparel rip.

  7. Now we will verify the installation and create a Desktop shortcut for easy access. Left-click the Start Button and then All Programs near the bottom of the list. Find and Left-click the VPM Apparel mini folder.
    • Now we will verify the installation and create a Desktop shortcut for easy access.

    • Left-click the Start Button and then All Programs near the bottom of the list.

    • Find and Left-click the VPM Apparel mini folder.

    • Right-click on the VPM Apparel mini shortcut, highlight Send to in the menu, and then click 'Desktop (create shortcut), as seen in the third image.

  8. Verify that there is now a VPM Apparel mini shortcut on your desktop. You are free to position this shortcut as you like. You can pin it to your Taskbar on the bottom of the screen by dragging it there, or you can leave it on the main screen. You are also still able to run the software using the VPM Apparel mini shortcut found in the Start Menu. If you have yet to set up your Veloci-T printer, refer to this guide. We will need to plug the printer into the computer for the following steps.
    • Verify that there is now a VPM Apparel mini shortcut on your desktop. You are free to position this shortcut as you like. You can pin it to your Taskbar on the bottom of the screen by dragging it there, or you can leave it on the main screen.

    • You are also still able to run the software using the VPM Apparel mini shortcut found in the Start Menu.

    • If you have yet to set up your Veloci-T printer, refer to this guide. We will need to plug the printer into the computer for the following steps.

    • Plug the USB cable from the printer into a USB port. Make sure to leave the dongle in as well. Turn the printer on by flipping the switch in the back of the machine next to the power cord.

    • You will see a small message appear in the lower right-hand corner of your screen, as in the second image.

    • You may see the message in the third image, Your device is ready to use.

    • Otherwise, you may get a message that the device has failed to install, and needs to be troubleshooted. Click the X to ignore this, as the VPM Apparel software installs its own printer driver automatically, which is available through the RIP.

  9. Double-click your VPM Apparel mini shortcut to launch the software. The first screen you will see allows you to set the measurement gradation. Set the unit to inches (or to a unit of your choosing) and leave the decimal places option at 2. Click OK. The next screen indicates that you are running the software for the first time and have no current production queues. Click Next. On the following screen, click Install Printer.
    • Double-click your VPM Apparel mini shortcut to launch the software. The first screen you will see allows you to set the measurement gradation. Set the unit to inches (or to a unit of your choosing) and leave the decimal places option at 2. Click OK.

    • The next screen indicates that you are running the software for the first time and have no current production queues. Click Next.

    • On the following screen, click Install Printer.

  10. Choose ''Veloci-T' from the list and click OK. The following screen asks you to locate the printer packages associated with the chosen printer. Make sure that the CD is in the drive and that the Search CD-ROM... box is checked, and then click Next. The next screen shows the progress of the transfer of the printer packages. When all of the progress bars are full and the screen matches what is seen in the third image, click Next.
    • Choose ''Veloci-T' from the list and click OK.

    • The following screen asks you to locate the printer packages associated with the chosen printer. Make sure that the CD is in the drive and that the Search CD-ROM... box is checked, and then click Next.

    • The next screen shows the progress of the transfer of the printer packages. When all of the progress bars are full and the screen matches what is seen in the third image, click Next.

  11. Verify that the highest version number of the installed printer packages is 4.3 and click Finish. The main operating window for the VPM Apparel software should now load automatically.
    • Verify that the highest version number of the installed printer packages is 4.3 and click Finish.

    • The main operating window for the VPM Apparel software should now load automatically.

    • We are now ready to perform the final set-up steps!

  12. Click Queues on the file menu bar along the top of the screen and click Manage Queues from the drop-down list. You will now see the Manage Queues window, which allows you to associate the printer with the software.
    • Click Queues on the file menu bar along the top of the screen and click Manage Queues from the drop-down list.

    • You will now see the Manage Queues window, which allows you to associate the printer with the software.

    • Click the drop-down list under the Port column and choose the EPSONEpson Stylus Office B1100 USB_001+ option from the list. This option will only appear if your Veloci-T is plugged into a USB port and turned on.

    • The USB_001+ tag after the driver name may have a different number. This depends on how many other printers have been plugged into your computer. Windows assigns each unique printer a USB number, which it applies even if the printer is unplugged and replugged. Once this value is set in the Port column, it will remain valid.

    • This value can change and may need to be reselected if a new printer driver or package is installed.

  13. Click the button with the three dots to the right of the drop-down list (...) Check both Infinite boxes, as seen in the second image.
    • Click the button with the three dots to the right of the drop-down list (...)

    • Check both Infinite boxes, as seen in the second image.

    • Click OK on the Port Properties window, then Close on the Manage Queues' window.

  14. You have now successfully set up the RIP software. Click the Open button on the top left of the toolbar, or click File and then Import File from the file menu bar in order to import your first image! Click the Open button on the top left of the toolbar, or click File and then Import File from the file menu bar in order to import your first image!
    • You have now successfully set up the RIP software.

    • Click the Open button on the top left of the toolbar, or click File and then Import File from the file menu bar in order to import your first image!

Finish Line

Equipment Zone

Member since: 06/05/2012

801 Reputation

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 570