Site Navigation

Your Account

Choose Language

  1. The Speedtreater-TX Nozzle Alignment Guide is used to hold the nozzle in position while tightening the nut. Correctly attaching the nozzle prevents the valve from dripping on the garment and maximizes the spray width.
    • The Speedtreater-TX Nozzle Alignment Guide is used to hold the nozzle in position while tightening the nut. Correctly attaching the nozzle prevents the valve from dripping on the garment and maximizes the spray width.

    • The Nozzle Alignment Guide has a slot cut out for the nozzle tip. Hold the guide with one hand, with the nozzle in the slot, while tightening the nut with a wrench in the other hand.

    • DO NOT overtighten the nut. Only need to use the wrench to torque the nut a little bit past what one can do by hand. Excessively tightening the nut can damage the nozzle itself.

  2. Assembly the nozzle and valve according to the Speedtreater-TX instructions. Tighten the the nut by hand until the nozzle tip can no longer be spun. Loosen the nut just a bit, until the nozzle can again spin. Hold the Nozzle Alignment Guide in one hand and place the nozzle through the slot. Rotate the guide so that it sticks straight out the back of the Speedtreater-TX. The nozzle will now be oriented perpendicular to the direction of the guide.
    • Assembly the nozzle and valve according to the Speedtreater-TX instructions. Tighten the the nut by hand until the nozzle tip can no longer be spun.

    • Loosen the nut just a bit, until the nozzle can again spin.

    • Hold the Nozzle Alignment Guide in one hand and place the nozzle through the slot. Rotate the guide so that it sticks straight out the back of the Speedtreater-TX. The nozzle will now be oriented perpendicular to the direction of the guide.

    • While holding the guide in place with one hand, tighten the nut slightly less than a quarter turn.

    • Slide the guide off the nozzle and remove the guide from the machine.

    • The nozzle is now correctly oriented to maximize your spray area.

Finish Line

Equipment Zone

Member since: 06/05/2012

801 Reputation

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 188