Site Navigation

Your Account

Choose Language

Tools

No tools required.

Parts

  1. Grab the 5 cartridges you filled in the How to Fill Veloci-T Cartridges guide.
    • Grab the 5 cartridges you filled in the How to Fill Veloci-T Cartridges guide.

    • Make sure the 5 colored plugs are in the filler holes and the 5 clear plugs are out of the air holes.

    • Put the clear plugs in the cartridges for storage or transportation, not when printing.

  2. Make sure your printer is turned on. Use the power button at the back of the printer.
    • Make sure your printer is turned on. Use the power button at the back of the printer.

    • Then, open the smoky gray cover at the top of the printer.

  3. When a cartridge needs to be replaced, the ink light on the control panel will be on.
    • When a cartridge needs to be replaced, the ink light on the control panel will be on.

    • Follow the steps in this guide to reset the cartridge and turn off the ink light.

    • Press and release the ink button once.

  4. The ink droplet arrow points at the cartridge that should be refilled/replaced.
    • The ink droplet arrow points at the cartridge that should be refilled/replaced.

  5. Press the Ink button again. If the ink droplet arrow is pointing at another spot on the sticker, continue with this step. If the ink droplet arrow is pointing at the silver metal, proceed to step 6.
    • Press the Ink button again.

    • If the ink droplet arrow is pointing at another spot on the sticker, continue with this step.

    • If the ink droplet arrow is pointing at the silver metal, proceed to step 6.

    • --

    • The ink droplet arrow is now pointing at the next cartridge that needs to be refilled/replaced.

    • Press the Ink Button again (up to four times) until the ink droplet arrow is pointing at the silver metal.

  6. This spot, pointing to the silver metal, just to the right of the yellow label is the Cartridge Replacement Position.
    • This spot, pointing to the silver metal, just to the right of the yellow label is the Cartridge Replacement Position.

    • You must make sure the arrow is pointing to the Cartridge Replacement Position before removing or inserting any cartridges.

    • You won't damage anything if you remove or insert cartridges at another time.

    • However, the only way to get the ink light to turn off is by only removing or inserting cartridges while in the Cartridge Replacement Position.

  7. Now that the print head is in the Cartridge Replacement Position, open the black cover using the gray tab.
    • Now that the print head is in the Cartridge Replacement Position, open the black cover using the gray tab.

    • Remove the cartridge(s) that was indicated in Steps 4 and 5.

    • Refill the cartridge(s), if necessary.

    • Proceed to the next step for instructions on putting the cartridge(s) back in.

  8. Ink cartridges should be ordered using the sticker as a guide. Push the cartridge down until it clicks into place. The order of the cartridges is BLACK-CLEANING SOLUTION-CYAN-MAGENTA-YELLOW
    • Ink cartridges should be ordered using the sticker as a guide.

    • Push the cartridge down until it clicks into place.

    • The order of the cartridges is BLACK-CLEANING SOLUTION-CYAN-MAGENTA-YELLOW

  9. Again, make sure that the clear plastic plugs are removed and the colored plugs stay in place.
    • Again, make sure that the clear plastic plugs are removed and the colored plugs stay in place.

  10. Then close the cartridge cover by pushing it down until it clicks into place.
    • Then close the cartridge cover by pushing it down until it clicks into place.

    • Close the smoky gray cover.

    • Press the ink button once. This will start an ink charge that takes about 90 seconds.

    • After the charge is finished, the cartridge replacement is complete and you can continue printing.

Finish Line

Equipment Zone

Member since: 06/05/2012

801 Reputation

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 528